850 hp (625 KW) at 7,300 rpm
890 Nm at 3,800 rpm
Consisting of:
- aluminum forged piston
- Engine block reinforcement by "pinning"
- camshafts for "VarioCam"
- "sputter" connecting rod bearings
- Modified oil pressure control
- 6x larger injectors
- Modified fuel pressure regulator
- 9FF hose set petrol system
- Additional Bosch Motorsport fuel pump "Intank"
- 2x Turbocharger Garrett GTX 3076
- External waste gates
- Turbocharger ball bearing and water cooled
- Modified turbocharger mount for new position
- 9FF Teflon hose kit for turbocharger oil supply
- 2x turbocharger oil collecting tank with accessories
- 9FF manifold set stainless steel
- 9FF flap exhaust system polished stainless steel
- 9FF tailpipes diameter 80 / 80mm stainless steel polished center
- 2x 100cell metal motorsport catalytic converters
- intercooler 96mm with hose set
- intercooler mounts with small parts
- Intercooler air ducts inside and outside
- Air filter box 997 Turbo with 9FF cover
- 2x bypass valves
- 9FF intake pipes with 80mm cross-section
- 9FF stainless steel Y-pressure pipe 60mm polished
- BMC air filter insert
- Reinforced clutch complete with organic lining
- 997 Turbo engine control unit
- 9FF control unit programming with 2 boost pressure characteristics via switch
- 3 bar Bosch MAP sensor
- Motorsport spark plugs with 9FF special heat value
- exhaust gas temperature sensor set
- Reprogramming the speedometer unit for turbo operation
- boost pressure indicator
- Conversion of the vehicle electrics / wiring harness for turbo operation
- Castrol RS 10W-60 engine oil
- oil filter and gasket kit
- 6th gear 0.82: 1 (corresponds to 346 km/h Vmax.)
Only for 997 GT3 MK1 3.6 additionally:
- Auxiliary shaft modified for drive oil suction pump
- New water pump housing with integrated oil suction pump
- turbocharger oil extraction line harness
Only for 997 GT3 MK2 3.8 additionally:
- 2x camshaft boxes 997 GT3 MK1 with covers
- camshaft for turbo operation
- 2x exhaust shaft covers
- 1x Turbocharger oil suction pump with mounting material
- hose set oil extraction
- 6x new ignition coils
- Conversion of the electrics to a 3-pole ignition system including relays etc.
- 2x new sprockets for exhaust camshafts including accessories
This conversion can only be carried out by us in Dortmund!
Attention: only items for shipping are shown here. All conversions that we carry out can be found in the configurator!
*Information on shipping costs can be found on the following page:
ARE YOU INTERESTED IN A NON-BINDING OFFER?
WE ARE HERE FOR YOU!